Machinist Manual

We are one of the nations leading providers of industrial solutions serving as the single-source for our clients custom shell and tube heat transfer equipment. Our fully integrated shop services include state-of-the-art technologies engineering design manufacturing fabrication maintenance and repair.

Ohmstede Ltd is looking for an individual that under the direction of the Machine Shop Foreman is assigned to drilling flanges tubesheets and baffles used in fabrication and/or repair of shell and tube heat exchangers.

1. Set raw material in the machine.
2. Adjust tools.
3. Operate the following machines - Horizontal boring mill Vertical boring mill Lathes Drill presses and Bridgeport knee mills.
4. Check / refill lubricating fluids periodically.
5. Perform preventative maintenance on the mill.
6. Inspect finished product.
7. Report and correct defects as required.
8. Perform assigned tasks in a safe manner avoiding and reporting unsafe practices.
9. Perform internal quality control of machining procedures.
10. Setup and perform work based on shop practices and procedures.
11. Removes shavings as needed.
12. Must be able to work 1^st (0330-1530) or 2^nd (1530-0330). Shifts vary between 8-12 hours depending on work load and are subject to change.
13. Other duties as assigned.

• Knowledge- H.S. diploma or equivalent; or equivalent experience.
• Able to work a 12 hour shift when necessary.
• Must pass drug screen.

Desired Experience:

• At least 2 years of experience operating Vertical Boring Mills/Vertical Turret Lathes.
• Machining stainless steels alloys and carbon steel.
• Worked in a custom fabrication shop.
• Operating jib and bridge cranes.
• Machining raised face tube sheets a major plus.
• Machining weld necks and flanges a major plus.

Required skills:

• Read and write English language. Able to read and interpret blueprints scales micrometers and depth mics.
• Familiar with fabrication and machining prints and tolerances.
• Familiar with flatness tolerances.
• Able to convert and understand fractions and decimals.

Heat noisy dusty cold chemical exposures pinching hazards stand for long periods of time some bending stooping push/pull twist squat lift & climb requires 50 lb. lifting ability and exposed to normal shop hazards.

#ohm

Please review our Affirmative Action Policy.