Ironworker I

CAPTIAL WORK. NO PER DIEM.

Position Summary

Structural Iron-workers will construct iron/steel structures to specifications.

Qualification Highlights

• Must have 4 years experience as an Iron-worker Helper or Structural Ironworker.

• Must have all Knowledge Skills and Abilities for positions (see below).

• Must be able to meet all physical requirements.

• Must be able to work at heights in excess of 300 ft.

• Must have all required tools.

• Must have reliable transportation.

Position Responsibilities

• Read blueprints and specification to determine the scope of work: locations quantities and sizes of materials required.

• Identify all tools required for tasks.

• Identify safety risks and the precautions required to eliminate those risks.

• Fabricate equipment according to blueprints or instructions from supervisors.

• Hoist equipment and tools into location via bull rigging or crane.

• Verify vertical and horizontal alignment of structural-steel members using plumb bobs laser equipment transits and/or levels.

• Connect columns beams and girders with bolts following blueprints and instructions from supervisors.

• Bolt aligned structural-steel members in position for permanent riveting or bolting.

• Pull push or pry iron/steel equipment into approximate positions for bolting into place.

• Cut bend and weld iron/steel pieces using metal shears torches and welding equipment.

JOB REQUIREMENTS

Required Qualifications

• Leadership Abilities

• Ability to take lead in erection of steel fabrication grid layout rigging ect.

• Ability to perform all job duties of craft trade.

• Drawings

• Ability to read understand IFC drawings.

• Ability to make hang list read details off drawings read all notes on drawings before erection locate and understand ECNs and holds on drawings.

• Understand when to stop production work and when a RFI needs to be initiated.

• Read and understand craft specs and cut sheets craft spec procedures and recommendations

• Able to locate piece marks for correct views and know how to pick out different elevations

• Being able to know the correct installation based on the orientation.

• Knowledge of symbols based on legend

• Rigging

• Knowledge of all types of safe rigging practices (chokers slings ect.)

• Ability to dictate correct knots based on material

• Connection

• Know all aspects of connecting

• Correct procedures of Bolting

• Torque vs Tension

• Fabrication

• Ability to read cut sheets

• Lay out from drawing

• Cut material from lay out and cut sheets

• Torque vs. Tension

• Knowledge of Torque and Values

• Knowledge of Tension

• Turn of the nut method

• Different types of indicators

• Understand how to use a Skidmore

• Plan work and execute
• Ability to take drawings required material line out helpers and execute work
• Tools and knowledge

• Knowledge of specialty tools (torque wrench Skidmore torque guns mag drills hogan drills)

• Welding and cutting

• Basic knowledge of welding (machine set up Mig stick gas ect..)

• Knowledge of cutting torch set up dangers usage cleaning types of tips and when to use the different types of tips

• Equipment Knowledge

• Knowledge of JLGs man baskets cranes

• Basic maintenance (inspections)

• Safe operations practices

• Signaling of equipment (ERTS NCCO NCCER)

• Flagging of cranes forklifts manlifts

• Knots

• Tying knots for tag lines ect

• Basic knots for lashing

• Math Skills
• Footage addition subtraction multiplication division fractions to perform all craft duties.

Physical Requirements

• Employee will be required to adhere to large amounts of standing walking bending squatting and lifting. Will talk and hear to communicate. Will use arms and hands to signal grab hold turn push pull: objects materials controls and tools. May be required to lift carry and move up to 50lbs. Willwork at heights climb ladders and stairways work off of platforms and man lifts and may occasionally work out on an open structure using the appropriate fall protection requirements. Will be required to wear personal protective equipment (PPE) including but not limited to: hard hat safety glasses/goggles ear plugs/muffs masks/respirators safety vests gloves and leather work boots.

Required Tools

• Metal Toolbox with Lock
• Spud Crescent Wrench with Carrier
• Center Punch
• 12x24 Framing Square
• 50 to 100 Tape
• 8 Side Cutters
• Sliding T-Bevel
• Hacksaw
• Set of Allen Wrenches
• 3 C-Clamps(3)
• Bolt Bag
• 6 lb Hammer Double Faced with carrier
• 6 x 12 Framing Square
• Spud Bar/Sleeve Bar
• Bull Pin with Carrier
• 25 Tape
• Vice Grips (2)
• Chalk Box Line
• 8 C-Clamps (2)
• Torpedo Magnetic Level
• 16 oz Plumb Bop
• Large Wedges (2)
• 12 lb Beater
• Small Wedges (2): 1 7/16 & 1 5/16
• 1 Raincoat
• 1 Rubber boots

ZACHRYis dedicated in providing a Safe and Drug Free work environment; and is an Equal Opportunity Employer.

CERTIFICATIONS AND/OR LICENSES REQUIRED*

NCCER - Industrial Ironworker

OTHER POSITION OR SITE REQUIREMENTS

must have valid DL

#LI-EO1