CAD Coordinator Transportation Engineer 3

FOR ASSISTANCE IN APPLYING:

Check out ourApplicant Tips on How to Apply! Need more resources Visit ourApplicant Toolkitfor additional support throughout the recruitment process.

BEFORE YOU APPLY:

• Meet Minimum Qualifications:Ensure you meet the Minimum Qualifications listed on the job opening by the job closing date. You must specify your qualifications on your application. The minimum experience and training requirements listed must be met by the close date on the job opening unless otherwise specified.
• Educational Credits:List your earned credits and degrees from accredited institutions accurately on your application. To receive educational credits towards qualification the institution must be accredited. If the institution of higher learning is located outside of the U.S. you are responsible for providing documentation from a recognized USA accrediting service which specializes in determining foreign education equivalencies to the contact listed below by the closing date listed on the job posting.
• Resume Policy:PerPublic Act 21-69 resumes are not accepted during the initial application process. As the recruitment process progresses candidates may be required to submit additional documentation to support their qualification(s) for this position. This documentation may include: a cover letter resume transcripts diplomas performance reviews attendance records supervisory references licensure etc. at the request and discretion of the hiring agency.
• Preferred Shift/Location:Select all location(s) and shift(s) you are willing to work on your application. Failure to do so may result in not being considered for vacancies in that specific location or shift.
• Timely Submission:All application materials must be received by the job posting deadline. You will be unable to make revisions once you officially submit your application to the State. Late submissions are rarely accepted with exceptions only for documented events that incapacitate individuals during the entire duration of the job posting. Request exceptions by emailing (Opens in a New Window).
• Salary Calculations: For current state employees salary calculations are not necessarily comparable from one of the three branches of state government (i.e. Executive Legislative Judicial) to the other.
• Note: Theonly wayto apply to this posting is via the Apply or Apply Online buttons on the official State of Connecticut Online Employment Center job posting.

AFTER YOU APPLY:

• Some email providers may experience delays or issues delivering messages. To avoid missing important updatessuch as referral questionnaires or interview scheduling linksplease check yourPersonal Status Boardregularly.
• For added convenience you can also enable text (SMS) notifications. To do this log in to your Personal Status Board and select Update My Contact Information.
• Referral Questions:This posting may require completion of additional Referral Questions (RQs) which must be completed by the questionnaires expiration date. If requested RQs can be accessed via an email sent to you after the job close date or by visiting your JobAps Personal Status Board (Certification Questionnaires section).
• Prepare For An Interview:Interviews are limited to those whose experience and training are most aligned with the role. To prepare review this helpfulInterview Preparation Guideto make the best impression!
• Stay connected! Log in daily to your JobAps Personal Status Board to track your status and check email (including spam/junk folders) for updates and tasks.
• The immediate vacancy is listed above however applications to this recruitment may be used for future vacancies in this job class.
• Note: This position will be filled in accordance with contractual language reemployment SEBAC transfer promotion and merit employment rules. Candidates who are offered and accept a position with the State of Connecticut are bound by the State Code of Ethics for Public Officials and State employees available at employer may participate in EVerify and will provide the federal government with your Form I9 information to confirm work authorization.

QUESTIONS WERE HERE TO HELP:

Due to high volume we are unable to confirm receipt or provide status updates directly. For recruitment updates please check your Personal Status Board and review our Frequently Asked Questions. If you have additional questions about the recruitment process reach out to Frank DeCusati at (Opens in a New Window).

Join the State of Connecticut and take your next career step with confidence!

• Oversees work of lower level engineers and performs complex design work;
• Designs difficult foundations and bridges of advanced design;
• Makes field inspection of bridge sites to obtain information necessary for design of important structures;
• Oversees field inspection of structural condition of existing structures and preparation of sketches plans and recommendations for adequate repair;
• Acts as liaison between towns and state as consulting engineer in repair of bridges;
• Oversees and conducts research on materials incorporated in bridges highways and miscellaneous structures and maintenance and construction methods in field;
• Oversees state and consultant engineers in review of storm sewer and culvert designs and computations prepared by Design division and contracting engineers for watersheds of 650 acres and less;
• Provides technical advice to Design division and District Engineers on pollution control measures and unusual storm sewer and culvert designs;
• Prepares computations for storm sewer and culvert designs;
• Attends field reviews on all new designs for highway projects;
• Recommends revisions to improve drainage design;
• Oversees laboratory work on soil samples for determination of void ratio water content specific gravity grain size distribution plasticity limits permeability optimum moisture content confined and unconfined compressive strength direct shear and consolidation;
• Prepares detailed geotechnical reports and recommendations;
• Oversees analyses computations preparation of plans and data relating to hydraulic problems encountered in planning and design of highways;
• Performs hydrographic analysis and flood routing for retention basin designs;
• Serves as expert witness in court cases;
• Reviews drainage design on major permit applications for shopping centers and housing developments;
• Assists in preparation and updating of Drainage Manual;
• Oversees engineers electricians and technicians in design or maintenance of extensive highway lighting traffic light installations and computerized traffic control systems;
• Performs complex work in preparation of plans specifications and estimated cost of electrical contracts and work;
• Oversees inspection of electrical construction and maintenance work and preparation of monthly and final estimates;
• Coordinates preliminary surveys and planning of engineering requirements for construction and maintenance of electrical installations with state utilities;
• Assists in coordination of work of design engineers with consulting engineers in preparation of plans to determine contract documents;
• Recommends need for test alterations revision of replacement of equipment associated with highway lighting traffic lights drawbridges and highway buildings;
• Acts as consultant to district forces and other state agencies;
• Oversees consultant engineers in the preparation of plans specifications and estimates of bridges and structural improvement construction and reconstruction of highways and construction or reconstruction of transportation facilities;
• Recommends treatment of alignment grade surface and drainage features;
• Makes project reports and analyzes comparative routes for economy feasibility and utility;
• Oversees activities of engineers and technical assistants engaged in review and processing of major traffic generator studies highway traffic engineering investigations surveys design and research;
• Reviews reports from investigators and subordinates;
• Prepares final reports and recommendations applying to traffic signs signals markings control devices illumination channelization detour and route designations;
• Represents department in state town public meetings;
• Oversees and reviews plans specifications and cost estimates for adjustment of relocation of public utilities in conflict with design and layout of construction for purpose of establishing their engineering adequacy;
• Determines extent to which state shall reimburse utility companies for costs incurred;
• Prepares and reviews agreements governing terms involved;
• Represents state in negotiations with Federal Highway Administration for reimbursement of funds to state;
• Confers with consulting engineers corporate municipal planners departmental personnel and others involved in coordinating utility adjustments with highway reconstruction work;
• Advises departmental auditors on acceptability of credits offered or claims for payment made;
• Conducts field and office investigations of engineering technical or other problems and prepares reports for higher level employees;
• Analyzes problems and recommends effective solutions;
• Assists in establishment of policy procedures and methods;
• Represents department in legislative matters;
• Assists in development and review of department contracts;
• Performs related duties as required.

WORKING LEAD LEVEL:

• As assigned by the supervisor distributes prioritizes oversees and reviews unit work;
• Provides staff training and assistance;
• Conducts or assists in conducting performance evaluations;
• Acts as liaison with operating units agencies consultant staffs and other outside officials regarding unit policies and procedures;
• Recommends policies and standards;
• Prepares reports and correspondence;
• Performs related duties as required.

• Possession of Professional Engineer (PE) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.20-302 may be substituted for the Bachelors degree requirement.
• Possession of Engineer-In-Training (EIT) licensure from the Department of Consumer Protection State Board of Examiners for Professional Engineers and Land Surveyors consistent with C.G.S.20-302 may be substituted for the Bachelors degree requirement.
• A Masters degree in engineering may be substituted for one (1) year of the General Experience.
• Current incumbents in the class of Transportation Engineer 2 (Engineering) who do not possess the degree or certification/licensure qualifications as detailed on this class specification may be considered for promotion to Transportation Engineer 3 (Engineering) upon having three (3) years of experience in transportation engineering. One (1) of the three (3) years must have been as a Transportation Engineer 2 (Engineering).

• Experience using 3D CAD Design Software such as Bentley OpenRoads OpenBridge or AutoCAD
• Experience coordinating effectively with other Department units consultants towns state and federal agencies
• Experience using Office365 Power BI and GIS software
• Experience with presentation skills and oral and written communication skills
• Experience analyzing problems and recommending effective solutions for engineering related issues
• Experience preparing and reviewing complex technical reports and documents
• Experience working independently being self-motivated and taking ownership of assignments

• Incumbents in this class may be required to possess and retain a valid Motor Vehicle Operators license.
• Incumbents may be required to travel.

AN AFFIRMATIVE ACTION/EQUAL OPPORTUNITY EMPLOYER

The State of Connecticut is an equal opportunity/affirmative action employer and strongly encourages the applications of women minorities and persons with disabilities.